Premier Heating Services in Clovis, CA
Since 2016, Caledonian Mechanical has supported homeowners and businesses throughout Clovis, CA with dependable Clovis heating solutions. Even though local winters are generally mild, a reliable heating system remains essential for consistent indoor comfort. With same-day scheduling, 24/7 phone support, and weekend availability, we make heating service in Clovis accessible whenever you need it. Clients also benefit from 1-year workmanship warranties and flexible financing options designed to make upgrades and repairs more manageable.
From uneven indoor temperatures to full system replacements with energy-efficient upgrades, we approach every project with care and professionalism. Whether you need heating installation, heating maintenance, or heating and air repair in Clovis, CA, our locally rooted team is focused on treating each customer like a neighbor and delivering service built on trust and reliability.
Our Heating Services in Clovis, CA

Heating Installation & Replacement

Heating Maintenance

Heating Repair

Heat Pump Services
Efficient Clovis Heating Solutions for Better Home Comfort
High-Efficiency Furnace Installation
If your property already relies on a furnace, upgrading to a high-efficiency model can improve performance and reduce energy use. These systems are designed to maintain steady warmth while supporting better comfort for homeowners considering heating installation in Clovis, CA.
Energy-Saving Heat Pump Solutions
Heat pumps are a practical choice for homes and businesses because they provide both heating and cooling from one system. During cooler months, they move heat indoors, and when temperatures rise, they reverse operation to help cool your space efficiently.
Zoning Systems for Better Heating Control
Zoning systems are ideal for homes with multiple rooms, expanded layouts, or areas that need separate temperature control. By managing comfort by zone, they can reduce wasted energy and support better heating service in Clovis for daily use.
Why Uneven Heating Happens in Clovis, CA Homes
Many homeowners deal with uneven heating, where one room feels warm while another stays noticeably cooler. In Clovis, CA homes, this can happen because of insulation issues, duct leaks, thermostat placement, or an older heating system that can no longer distribute air properly.
Below are the most common reasons for inconsistent indoor temperatures and when professional heating and air repair in Clovis, CA, may be needed:
Insulation Issues That Affect Clovis Heating Comfort
Older or poorly insulated homes can lose warm air quickly, making it harder to maintain steady indoor comfort. Weak insulation forces your system to work longer, which can increase energy use and reduce overall heating performance.
Duct Problems That Lead to Heating and Air Repair
Leaky, blocked, or poorly designed ductwork can stop warm air from reaching every room evenly. A professional inspection can help determine whether duct sealing, airflow balancing, or repair work is needed to improve comfort.
Thermostat Placement and Heating Service Issues
A thermostat placed near sunlight, drafts, doors, or heat-producing appliances can trigger uneven heating cycles. Moving or upgrading the thermostat can improve accuracy and support better temperature control.
Older Systems That May Need Heating Repair
Older systems may struggle to heat your home evenly, especially when parts are worn or efficiency has dropped. With timely heating repair in Clovis, CA, many issues can be corrected before replacement becomes necessary.
Trusted by Clovis, CA Homeowners and Businesses
See why local homeowners and businesses choose Caledonian Mechanical when comparing a dependable heating company in Clovis, CA, for honest communication, reliable workmanship, and quality comfort solutions.
Google rating score: 4.7 of 5, based on 318+ reviews
Flexible Financing Made Simple
Questions customers often ask
My gas furnace lights, then shuts off. What should I tell the technician?
Tell us how long the flame stays on and whether the blower keeps running afterward. If the flame drops out within seconds, we check whether the control board is getting a steady signal from the flame sensor. If it heats for several minutes first, we also check airflow and measure the temperature rise across the furnace against the range on its nameplate. On fall service calls, we’ve found furnaces running near the top of that range with restrictive filters and small ducts. If you can see a fault code through the viewing window, a photo helps us track down what happened.
My Coleman furnace lights, but no air comes out. Is the blower bad?
On a Clovis no-heat call, a Coleman BGM06-012-CX lit properly, but the indoor blower never started. The motor ran when we tested it independently. The ignition board failed to send 115 volts to the blower during the heating cycle, so we recommended replacing the board. If yours acts the same way, leave heating off until it’s checked.
What should I do if I smell natural gas near my furnace?
Get everyone outside immediately. Leave lights, switches, appliances, and phones alone until you’re outside and away from the odor. Call 911 and PG&E from a safe location. Wait for emergency responders or the utility to clear the building before returning. A furnace repair visit comes after the immediate gas hazard is addressed.
My gas furnace lights, then shuts off. What should I tell the technician?
Tell us how long the flame stays on and whether the blower keeps running afterward. If the flame drops out within seconds, we check whether the control board is getting a steady signal from the flame sensor. If it heats for several minutes first, we also check airflow and measure the temperature rise across the furnace against the range on its nameplate. On fall service calls, we’ve found furnaces running near the top of that range with restrictive filters and small ducts. If you can see a fault code through the viewing window, a photo helps us track down what happened.
I’m switching from a furnace and AC to a heat pump. What size should I buy?
We start with what each room needs on a hot afternoon and a cold morning. For a Sanger home with vaulted ceilings, the bedrooms and the open living area had different loads and different hours of use. That mattered more to the design than the total floor area alone. Ask for a room-by-room load calculation, often called Manual J, and a check of what your existing ducts can carry. Then we can show you which heat pump delivers the heating and cooling your house needs.
My Coleman furnace lights, but no air comes out. Is the blower bad?
On a Clovis no-heat call, a Coleman BGM06-012-CX lit properly, but the indoor blower never started. The motor ran when we tested it independently. The ignition board failed to send 115 volts to the blower during the heating cycle, so we recommended replacing the board. If yours acts the same way, leave heating off until it’s checked.
Why does my Carrier furnace sound different in the second stage of heat?
A two-stage furnace can increase burner output and blower airflow when more heat is needed. On a Carrier 58MVP, we check which stage the control is requesting and compare the temperature rise with the furnace rating. Tell us whether the sound changes once and settles down or keeps changing while the house stays cold.
A small fan growls before the furnace lights. Which fan is that?
On many gas furnaces, that first fan is the draft inducer. It moves combustion gases and starts before the main indoor blower. We’ve found inducers drawing excessive current during fall maintenance. We check the motor, venting, and pressure-switch response before ordering a part. A recording of the startup noise can help if it happens intermittently.
Why is there water under my high-efficiency furnace in heating mode?
A condensing furnace produces water as it heats. That water should travel through a trap and drain. A blockage, loose hose, or failing condensate pump can let it back up or leak out. Tell us whether you see water only during heating. We trace the heating drain and check it under operation after the repair.
What if the carbon monoxide alarm goes off while the heater is running?
Move everyone outside into fresh air immediately and call 911 from outside. Stay out until emergency responders say it’s safe to return. Carbon monoxide has no smell. Once the property is cleared, have the fuel-burning equipment and venting checked before using the heater again.
Is steam coming off my heat pump on a foggy Clovis morning normal?
A brief cloud of vapor can be part of defrost. The heat pump warms the outdoor coil to clear frost, then returns to heating. If ice stays on the coil, the fan strikes ice, or the house never warms back up, request service. A photo showing how much of the coil is covered helps us assess it.
Why does my thermostat keep showing AUX heat?
On systems with backup heat, AUX means the thermostat or controls have called for that extra heat. A short period during defrost or after a large temperature change can be expected. If it stays on in mild weather, we check whether the outdoor unit is running, how the thermostat is staged, and how much heat the system delivers.
What should I do if I smell natural gas near my furnace?
Get everyone outside immediately. Leave lights, switches, appliances, and phones alone until you’re outside and away from the odor. Call 911 and PG&E from a safe location. Wait for emergency responders or the utility to clear the building before returning. A furnace repair visit comes after the immediate gas hazard is addressed.
What if the carbon monoxide alarm goes off while the heater is running?
Move everyone outside into fresh air immediately and call 911 from outside. Stay out until emergency responders say it’s safe to return. Carbon monoxide has no smell. Once the property is cleared, have the fuel-burning equipment and venting checked before using the heater again.
Is steam coming off my heat pump on a foggy Clovis morning normal?
A brief cloud of vapor can be part of defrost. The heat pump warms the outdoor coil to clear frost, then returns to heating. If ice stays on the coil, the fan strikes ice, or the house never warms back up, request service. A photo showing how much of the coil is covered helps us assess it.
Why does my thermostat keep showing AUX heat?
On systems with backup heat, AUX means the thermostat or controls have called for that extra heat. A short period during defrost or after a large temperature change can be expected. If it stays on in mild weather, we check whether the outdoor unit is running, how the thermostat is staged, and how much heat the system delivers.
My heat pump started heating in Cool mode after a thermostat change. Why?
The thermostat has to match the way the heat pump switches between heating and cooling. On an ecobee installation, we check the equipment configuration, reversing-valve setting, and wiring against the outdoor unit diagram. Keep the old thermostat model or a photo of its connections for the service visit.
Why does my Bosch IDS keep running after the house feels comfortable?
The Bosch Inverter Ducted Split can vary compressor output as demand changes. A long, quiet run can be normal when the thermostat is holding temperature. If the temperature drifts or airflow changes sharply when a zone closes, we check the blower settings, zone dampers, and system response together.
My wall-mounted mini-split is dripping indoors. What needs checking?
Turn that head off and protect the area below it. We check the drain pan, the slope and route of the drain, and the condensate pump if one is installed. We also look for coil icing. After a repair, we run the head in cooling and verify that water reaches the drain outlet.
Fair and Transparent Pricing for HVAC Services
Includes two scheduled tune-ups per year with no charge for the first service call.